MOTHERBOARD INSTALLATION TIPS
Install the motherboard is not something that sulitn but need only require accuracy and willpower. To do these things to note are: 1. Special attention to the jumpers.
Until now there is no standard layout for the jumpers on the motherboard. Because industrial motherboard manufacturer, has its own layout design. Although not prominent among their respective manufacturer. However, for the first time you install a new motherboard, we recommend reading the manuals. Because not all motherboard products, has shown clear text explanation on the motherboard PCB. Do not second-guessing on this.
2. Screw technology.
Before installing the motherboard, most chassis equipped with a rather large screws. Optimize usage. Try all the motherboard installed fastener point screw hole. Thus, the motherboard can be installed with adhesive on the casing. But certainly not the origin pairs. Customize the length and size of screws used in accordance with holes.
3. Use the I / O Shield.
An iron plate that serves to close the gap there between the input / output connectors of the motherboard. With a pair of iron plates, in addition to the computer will look neat, the computer will also be more closed so as not accessible by dirt or insects.
4. Select the appropriate port.
The assumption that by putting the SATA or PATA drive into any connector will make your system can boot. Some motherboards provide a RAID controller for SATA / PATA. For this, requiring drivers who are usually included in a diskette. You must first install the new Windows XP you can boot.
5. Customize RAM.
If you install the first memory slot is blue, the second memory was not necessarily so. But what if the motherboard has four memory slots with the same color? If you do not get the proper configuration for the dual-channel memory, the system likely will experience significant performance degradation.
6. Use the appropriate power connectors.
In the latest release of motherboards using the connectors that are different from previous. Therefore, pairs all existing power connectors match those on the motherboard, you should never combine the two into a single power connector, because it can cause fatal damage.
7. Installation of the processor.
This is the hardest part in the installation of the motherboard. Because if you mistakenly put it not possible that your processor will be damaged. In the old motherboard, you need a screwdriver to release the tool hooks heatsink.
Until now there is no standard layout for the jumpers on the motherboard. Because industrial motherboard manufacturer, has its own layout design. Although not prominent among their respective manufacturer. However, for the first time you install a new motherboard, we recommend reading the manuals. Because not all motherboard products, has shown clear text explanation on the motherboard PCB. Do not second-guessing on this.
2. Screw technology.
Before installing the motherboard, most chassis equipped with a rather large screws. Optimize usage. Try all the motherboard installed fastener point screw hole. Thus, the motherboard can be installed with adhesive on the casing. But certainly not the origin pairs. Customize the length and size of screws used in accordance with holes.
3. Use the I / O Shield.
An iron plate that serves to close the gap there between the input / output connectors of the motherboard. With a pair of iron plates, in addition to the computer will look neat, the computer will also be more closed so as not accessible by dirt or insects.
4. Select the appropriate port.
The assumption that by putting the SATA or PATA drive into any connector will make your system can boot. Some motherboards provide a RAID controller for SATA / PATA. For this, requiring drivers who are usually included in a diskette. You must first install the new Windows XP you can boot.
5. Customize RAM.
If you install the first memory slot is blue, the second memory was not necessarily so. But what if the motherboard has four memory slots with the same color? If you do not get the proper configuration for the dual-channel memory, the system likely will experience significant performance degradation.
6. Use the appropriate power connectors.
In the latest release of motherboards using the connectors that are different from previous. Therefore, pairs all existing power connectors match those on the motherboard, you should never combine the two into a single power connector, because it can cause fatal damage.
7. Installation of the processor.
This is the hardest part in the installation of the motherboard. Because if you mistakenly put it not possible that your processor will be damaged. In the old motherboard, you need a screwdriver to release the tool hooks heatsink.
Tips on Using the Keyboard Mouse Function
Have your mouse problem? As the mouse is not functioning fully, want to click once, double-click it to, or cursor anywhere Can not be controlled. But how Those if no mouse, can not operate a computers.Any tips for WHO Those errors have his mouse, before buying a new mouse, namely by activating the mouse function on the keyboard.
Here are the Steps:
1.Control panel, start annd select control panel. To start press the windows symbol on the keyboard or pressing Ctrl+Esc, then use the arrow Kea anger control panel, press Enter.
2. control panel, select Accessibility Options. Select arrow keys with, then hit enter.
3.Accessibility the Options dialog, select the Mouse tab. By way of using the Tab, and the arrow button.
4.Mouse tab, tick 'Use MouseKey' by pressing Alt + M.
5.for further settings, press Alt + S to the setting.
6. Settings dialog, check 'Use Shortcut' by pressing Alt + U, tick the 'Choose to Shift to speed up and slow down, by pressing Alt + H, on the option' use MouseKey Pls NumLock is' select by pressing the off button Alt + F, tick the 'use mousekey status on screen' by pressing Alt + S.
7. Then click OK, by pressing Enter.
After setting is completed, note the system tray (bottom right of the existing hours), the mouse will of the display indicator, the sign still crossed, to activate it, turn off numlock numlock by pressing the button on the keyboard (its position above the number pad on the keyboard).
In active mousekey position, We Can use Numpad function as a mouse, there are Signs on the Numpad Arrows, an arrow is Used to move the mouse cursor. Figures 4, 8, 6, 2 to move the mouse cursor to the left, top, right, down. While the numbers 7, 9, 1, 3 to move the cursor diagonally. Figures 5 to click, double click the + sign to (double click), the number 0 for the click and hold (hold).
Quickly move the cursor to use / her pressing the Ctrl button to slow the movements Of the cursor by pressing the shift keys. To right click, use right click button on the keyboard are located Between the Ctrl and the windows logo on the right.
Big Bang Fuzion Motherboard for gaming
Everyone wants to have a sophisticated computer and meet all the needs of their owners. Moreover, if want to make the computer as a gaming machine-heavy game, would have hoped to have a computer that can support these games. MSI tries to make it happen by bringing the motherboard that allows gamers to simultaneously run multiple GPUs from different brands as well. Surely this is something other than the other. Which motherboard for devoted only use the GPU than just one producer, has become more free for gamers to use several different GPUs in accordance with their wishes.
Big Bang Fuzion Motherboard MSI outputs are powered by a 200 parallel processor LucidLogix Hydra which works with a given number of GPU, CPU or chipset to deliver scalable performance of multi-GPU 3D graphics in the computing environment.
Affordable costs, flexibility and performance remains to determine the attributes among the game lovers who prefer to modify its system to meet the desire of personal style and individual needs as well
"Finally, we give gaming enthusiasts a choice. They know when they'll be ready to upgrade tomorrow or six months from now, they will choose from new technologies in the market, apart from the graphics chip vendors. "
Steiner added that the Hydra offers a generic solution to the game hungry for a great performance which was hampered by the inability to upgrade their machines to multiple GPUs.
Big Bang reportedly MSI motherboard this sophisticated new Fuzion will be present in mid-January 2010. Unfortunately not mentioned at all how approximately the range of motherboard
Paypal is more secure than other online payment tool
Paypal is one of the means of payment in a secure internet. Paypal is one way to pay and get bayaransecara online. Paypal can be used in a variety of transactions such as online business, buying and selling goods, buying software, received payments from other parties as we ll also get a fee that will go into our paypal account which can then be withdrawn (withdraw) directly into your account our bank. Having a paypal account is crucial if we are doing business diinternet and if we find money on the internet. Because most of them will pay us through paypal. If we do not have paypal then we can not get paid from dollar-producing programs on the internet. Paypal is much faster than a check or money order. More than 99 million Internet users prefer PayPal to send and receive money. PayPal has gained trust and comfort to transfer money online, almost 95% of payment on eBay using PayPal. eBay uses PayPal as their online auction payment intermediaries.
Paypal is more secure than other online payment tool
Purchaser / Buyer who feels harmed or did not fit that description notified may request money back to the Seller / Seller within maximum 45 days after the payment. If the buyer uses a credit card chargeback will receive a refund of the credit card company.
PayPal also protects the seller from a refund or complaint that is not true of the buyer according to proof. Protection for sellers is designed to protect sellers from buyers who claim to have sent the money claimed to have no record of payment receipt and a description of the transaction, every purchase and payment using PayPal there is always a record of proof of payment in your PayPal account in the sending and receiving money, as evidence if the right has occurred remittances between the two
From this it can be concluded using PayPal is more secure than other online payment tool for sending and receiving money because there is proof of payment and the record description, and can make complaints if there is something right or wrong to avoid a complaint
How does PayPal work?
As a broker in online transactions, PayPal makes someone in transferring money only with "the email recipient." Other party can not see the credit card information or bank account. This became the advantages of PayPal in maintaining the security of personal data users.
Some Troubleshooting the Scanner
Troubleshooting 1:At the time of connecting the computer to the scaner to show the error message "Access scanner failed" or "scanner not found" that thwart the process of scanning to be performed.
Solution:
scanner that the cause is not yet connected to the computer hardware. Scanners that have not connected this hardware could have caused the SCSI-Interface card is not installed correctly. If the SCSI cable is not really well connected, it will disrupt the relationship between the scanner and card. Turn off the computer and check the cord connection.
It should also be remembered that at the time of computer, scanner devices must be turned on first before dinyalahkan computer.
Troubleshooting 2;
Computers can be connected to the scanner. But when doing a scan process, suddenly the process stopped and an error message appears "not Enough memory".
Solution:
usually occurs because the rest of your hard disk space is very small. Try using disk utility to add the rest of the space. Or by scanning the image again at a lower level of dpi, and at a lower color depth also, for example, grayscale or black.
Troubleshooting 3;
scanning process was not started soon. After berjalanpun process was very slow.
Solution:
If that happens, do the checks as follows:
- Trying to do checks on the source document to be scanned. Make sure the automatic closing penapang has been closed tightly.
- Another thing to also note is that a cable connection, whether the conditions are still good. Each end and the base is already well embedded. Troubleshooting 4;
After the scan process is executed, it scans the image results are not satisfactory. Picture looks cracked and there are patches that contaminates the image.
Solutions:
The first analysis of damage to the image, could have been caused by a fungus in the scanner glass. To overcome this glass clean inside and out regularly with a liquid cleanser, which many chemicals are sold in stores.
If the image was cracked, the problem may be at a resolution of the image. Nothing wrong if you raise the resolution higher than previous figures. It usually takes a long time of scanning. To be more brief, you should limit the (crop) on the desired area only Each scanner must have the tools to perform these croop.
Troubleshooting 5;
Scan process runs smoothly, but the scanned image looks unclear and vague as affected by blur effect.
Solution:
If the scanned image is blurred, you try to set displaynya Hight resolution color (16 bit), and allow the scanner to warm up (warming up) for several minutes. Noteworthy is the cleanliness of the glass surface, because if dirty clean can affect whether or not the scan results later. Make sure the glass is always clean. Clean with a soft cloth.
Troubleshooting 6;
different quality of the scanned images on multiple computers
solutions:
Differences in image quality can arise because of differences in VGA quality at each computer. The photo will look good when you use a computer with high VGA (minimum 32 Mb). Instead, the image will appear broken when you see him use a computer with a mediocre VGA (under 32 MB). Actually the quality of images generated from the scanner is the same or unchanged. Just look at the monitor (VGA computer with low), which makes the image as if it were damaged.
How to Change the Power Function Buttons on the Windows 7/Vista
Default function of the power button on my windows 7 is shut down, and in Vista is a sleep, which may be less work for some users. So, here it tries to explain how to change it.Change the Power Button Functions in Windows 7
In Windows 7 it is very easy to do - go to Start Menu / Taskbar Preferences by right-clicking on the start menu and click Properties. What you need only change the Power Button Action in the drop-down list to what suits you.
Changing Function Power Button in Vista
Changing the power button functionality in Vista is actually very easy just by a little trick.
1.Open a command promt (type "cmd" in the start menu search field) then type the following at the command prompt window: powercfg.cpl, 1
2.You can also use another way: Control Panel \ Power Options \ Change Plan Settings \ Change Advanced Power Settings
3.Once you get a window like the one above, scroll down so as to appear the words "Power buttons and lid"
4.From here, you can change options such as:
- Lids close action: action to be taken if the screen is closed notebook
- Power button action: action will be taken if physical power button is pressed
- Sleep button action: action will be taken if physical sleep button is pressed
- Start menu power button: the action will be taken if the power button on the start menu click
5.You can alter the function of the power button to Sleep, Hibernate, or Shut Down, or even not working for the physical power button.
hopefully useful.......
How to Overcome Slow PC Troubleshooting
• There are several things that must be observed to respond to the problem "computer slow"1. Spyware and Virus is one of the causes of a slow pc, spyware comes from banners and ads on a web page into action when we access the pages / banners through a browser has a security hole is not good, so that the spyware is very close to IE.
Some ways to remove spyware:
- Identification and analysis process which is running with the windows task manager.
- Identify and disable the relevant services through the management console.
- Identify and disable existing services in the startup items in system configuration utilty.
- Find and delete the existing entry in the registry at startup.
- Identify and delete suspicious files.
- Install and use spyware detection and removal.
2. Processor Overheating. Most processors easy to produce heat, thus requiring special cooling fan and kind of special, so that when the temperature increases beyond the limit of the processor, the system will slow and the process will run slower. Processor fan that failed due to:
- The dust which hamper the smooth rotation of the fan.
- Fan Bearing fan motor is damaged and there is a doll so that the fan is spinning a sound krek-krek
3. Bad ram. Some situations may also be due to ram a bad influence, this
caused by:
- RAM timing is slower than optimal machine specifications.
- RAM which has a minor value can only be seen after going through several tests.
- RAM is too hot.
- Hard to fail. If the hard disk often experience failure, this will also worsen the performance of the computer, and many of the causes of this kind fail, this will cause the hard drive:
- Access time is slower.
- The number of bad sectors which continued to increase during the scandisk.
- There are no unexplained bluescreen.
- Failed Boot.
5. Bios Settings. Usually dicustom bios that has not undergone a process of slowing the setting will be a few seconds, especially at boot time, for that we must mengcustom bios settings so that performance can be accelerated boot process
6. Disk type / controller compatibility. Usually motherboards now have a good controller for parallel ATA disk, but we must pay attention to its IDE cable, because cable has a certain specification, there is a UDMA 33, 66, and 100, if we look physically, the form of a fibrous cord that smoother and more refined, while the UDMA 33 serabutnya bit, so use a cable that has a high specification for the disk.
7. Windows Services, a service that must be turned off if we do not membutuhkanya
8. Process is invisible.
attention to process what is going on in our computer to see the task manager, and we can end taskkan or kill, then we can delete. exe him.
9. Disk Fragmentation
for that we need to tidy up the data on our computers, that is with mendefragnya. if we use windows xp, we can use defrag.exe and put it in the schedule to run at the time that we specify.
10. Background applications. more and more attached to the systray icon that causes the computer to respond more slowly to the process so that we need to turn it off or turn off unnecessary ie by accessing the registry:
HKEY_ LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Run and
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ RunOnce
Erase key is not required.
Subscribe to:
Posts (Atom)
sponsor link
YM
